Survey monuments mark land boundary corners, geodetic control points, and local control points. They provide the physical reference needed to accurately locate property boundaries, easements, rights‑of‑way, and improvements. They are essential to reliable mapping, construction, and the City’s GIS system.
Finding Survey Monuments
Many monument locations can be found in the City’s Survey Control App. This resource shows a monument’s location and condition.
- Right of way monuments are typically located in the public right‑of‑way, often in the middle of the roadway, or at intersections. These monuments can include a wide variety of markers but are most commonly metal disks 1"–3" in diameter. They are often buried below the roadway surface and are covered by protective lids.
- Horizontal control markers are often set outside the roadway in sidewalks or curb lines. The are typically metal disks 2"–3" in diameter and are stamped with “City of Bellevue” identifiers.
- Vertical control monuments (benchmarks) are commonly set in sidewalks and are often marked the same as horizontal control markers. Some vertical control markers also serve as horizontal control markers.
Monument Protection Requirements
Survey monuments are protected by Washington State law (RCW 58.24.040 and WAC 332‑120). Anyone performing construction or maintenance work must protect all monuments in the work area. If a monument must be disturbed, a permit is required, prior to disturbing the monument, from the Washington State Department of Natural Resources. The party responsible (owner/developer) must pay all costs to replace or reestablish the monument and ensure all contractors comply. Failure to follow state requirements is a gross misdemeanor, punishable by fines, jail time, and the cost of monument reestablishment, which can exceed $10,000.
Why Monument Preservation Matters
Destroying a monument can significantly increase the cost and complexity of determining property, right‑of‑way, and easement locations. Replacing one monument may require locating several others and resolving historical evidence to legally reestablish its position.
Before Beginning Work
If your project has been processed through the City’s Development Services Department, the plans and specifications should include instructions for preserving monuments. In addition to these instructions, contractors should check the City’s Survey Control App and perform visual inspection of the site to determine whether monuments are present in your work area. If a monument is missing or buried, please notify the City before work begins to avoid replacement costs.
Permission to Disturb a Monument
Before disturbing any survey monument, an Application to Remove or Destroy a Survey Monument must be submitted to the Washington State Department of Natural Resources, Public Land Survey Office (PLSO). The application is available on the DNR website and must be completed with the assistance of a Professional Land Surveyor licensed in Washington State.
City Projects
When the City is the project owner, the project plans and specifications will outline the required monument‑protection procedures. City land surveyors will manage the application process from start to finish. Typically, you must contact the City Engineer at least two weeks before disturbing a monument. This allows City survey crews to collect the necessary measurements and submit the DNR application in advance.
If a monument is disturbed during construction, the contractor is responsible for its replacement and must coordinate with City surveyors to ensure accurate installation.
Private Development
Private development projects permitted by the City will include plans, specifications, and permits detailing the required monument‑protection procedures. The owner or developer must hire a Professional Land Surveyor to submit the DNR application. The private surveyor will oversee the entire process.
Some projects may require installing new monuments where none previously existed. In such cases, a survey must be filed with the King County Recording Office. The private land surveyor will advise and guide you through that process.
Legal Disclaimer
This advisory is not a substitute for applicable codes and regulations. Applicants are responsible for complying with all relevant requirements, whether or not they are referenced in this advisory.